The gpro hand piece board 7111-00-2795 is a PCB assembly used in compatible Candela Pro Series DCD handpieces. It forms part of the electronic interface between the handpiece and the laser console, supporting communication and control signals needed for handpiece operation. Available through Eldowin, this component is intended for professional service and replacement applications. For businesses sourcing a Candela Hand Piece PCB Board, identifying the correct part number and confirming the handpiece configuration are essential steps before requesting a quotation or arranging replacement.
A laser handpiece relies on more than its external housing and optical components. Its internal electronics help the system receive and process information associated with operation. The handpiece PCB participates in this communication pathway, allowing relevant signals to pass between the handpiece and the console. When a fault develops along that pathway, technicians need to determine whether the board, cable, connectors, or another component is responsible. Understanding the board’s role helps buyers discuss their requirements accurately with a supplier and avoid ordering a component based only on a general symptom.
The role of the GPro handpiece board
According to Eldowin’s product description, the gpro hand piece board 7111-00-2795 supports handpiece communication, signals associated with energy delivery, DCD cooling timing, and safety interlock communication. These functions place it within the handpiece electronics section of the system. The board contributes to coordinated operation through its electronic interface; its condition therefore matters when investigating communication or control problems. However, replacing the board should follow professional diagnosis, because other connected components can produce similar symptoms.
For buyers researching a GentleMax Pro DCD PCB, cooling-related communication is particularly relevant. Eldowin identifies DCD cooling timing among the functions supported by this assembly. If cooling spray timing becomes inconsistent, the PCB may be one possible area for investigation. That observation does not establish the board as the cause. A technician should evaluate the associated handpiece connections, cable path, and related components before deciding which part requires replacement. This approach helps connect the purchasing decision to an identified service requirement.
Part identification and configuration checks
The most useful identifier for this product is its part number: 7111-00-2795. General descriptions such as “handpiece board” can refer to different assemblies, so the numerical reference should accompany any inquiry. Eldowin lists the component type as a PCB assembly, its application as the DCD handpiece, and its primary function as handpiece communication and control. Providing these details when requesting pricing helps clarify which product is needed and gives the supplier a starting point for checking compatibility.
The product page lists use with compatible GentleMax Pro DCD handpiece configurations and also describes compatibility with selected GentleLase Pro configurations. It additionally notes that multiple suppliers list the part for compatible GentleYAG Pro handpieces. These references should not be interpreted as universal compatibility across every device or handpiece in those families. Before ordering a Candela Hand Piece PCB Board, buyers should confirm the specific system, existing board reference, and handpiece configuration with the supplier and the technician responsible for servicing the equipment.
Understanding Hand Piece Slider Sensor PCB searches
Some buyers may use the phrase Hand Piece Slider Sensor PCB while researching handpiece electronics or problems involving size information. However, Eldowin’s product page identifies 7111-00-2795 as a DCD handpiece communication and control PCB assembly; it does not explicitly establish “Hand Piece Slider Sensor PCB” as an interchangeable product name. Buyers using this search term should therefore compare the required component’s reference and function with the listing. A keyword match alone is insufficient to confirm that is insufficient to confirm that two descriptions refer to the same replacement useful when preparing a purchasing request. If a service report specifies a Hand Piece Slider Sensor PCB, include that description alongside the equipment model and any available component number. Ask the supplier to confirm whether the listed assembly matches the diagnosed requirement. Clear identification can reduce misunderstandings between purchasing teams and service technicians, especially when different catalogs use different wording for handpiece components. The final selection should depend on verified compatibility rather than a similar title or appearance.
When professional diagnosis may involve the board
Eldowin lists several possible replacement indicators for this assembly. These include a handpiece that is not recognized by the system, incorrect or missing handpiece size information, inconsistent DCD cooling spray timing, firing or energy-delivery failures, and intermittent handpiece operation. Such symptoms can justify investigating the handpiece electronics, but they do not independently confirm PCB failure. A service assessment should consider the complete relevant communication path before a replacement is ordered.
For clinics and maintenance businesses, this diagnostic step also supports more efficient purchasing. Ordering a GentleMax Pro DCD PCB without confirming the fault can leave the original problem unresolved. A documented assessment gives the purchasing team a clearer specification and helps the supplier respond to the actual requirement. Installation and replacement should be handled by qualified laser service technicians, as stated on the product page. The correct board configuration and compatibility with the specific DCD handpiece should be verified before installation.
Requesting availability and shipping information from Eldowin
Eldowin provides an “Add to quote gpro hand piece board 7111-00-279-00-2795. Buyers can use the product listing to request current availability, pricing, lead time, and delivery information. A useful inquiry includes the part number, device model, required quantity, and shipping destination. If compatibility remains uncertain, include the existing board details and the technician’s component description so the supplier can review the request before the order progresses.
The website states that Eldowin ships laser spare parts worldwide and inspects and securely packs orders before dispatch. Shipping costs and delivery times vary with the destination, product type, quantity, and selected shipping method, so these details should be confirmed for each quotation. Eldowin also states that it is not affiliated with or authorized by Candela. Buyers should understand the listing as a compatible replacement component offering and request clarification about any additional product specifications they require.
For professional buyers seeking a Candela Hand Piece PCB Board , the Eldowin product page provides a reference for part identification and quotation requests. Matching part number 7111-00-2795 to the correct handpiece configuration, confirming the diagnosis, and checking supply details helps support an informed replacement decision. Contact Eldowin with your equipment and component information to discuss compatibility, current pricing, and shipping options for your service requirements.